Setting The Mailbox Password (For Mailbox 2 And 3); Set Answering - Panasonic KX-TG5240M Operating Instructions Manual

Mailbox Features
Setting the Mailbox Password
Handset
You can use Mailbox 2 or 3 as personal mailboxes. To prevent unauthorized people
from accessing your mailbox and listening to your messages, assign a
2-digit password (00–99) to Mailbox 2 or 3. Each password and the remote code
(p. 71) must be unique. Once a password is assigned to Mailbox 2 or 3, no one can
listen to messages without entering the password.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Press the soft key (
answering".
4
Scroll to "Set mailbox2&3" by pressing
[d] or [B], then press the soft key (
5
Select the mailbox by pressing [B] (Mailbox
2) or [d] (Mailbox 3).
6
Enter a 2-digit password (00–99).
• If you entered the wrong password, re-enter the
correct one.
7
Press the soft key (
• If the handset beeps 3 times, you entered the same password as the other
mailbox or the remote code (p. 71), or you entered a one-digit password.
Start again from step 6 and select another password.
8
Press [OFF].
To confirm the password, repeat steps 1 to 5.
• The password is displayed. When finished, press [OFF].
To erase the password
Press the soft key (
[OFF].
• You can access the mailbox without entering the password.
62
) at "Set
SELECT
).
SAVE
) in step 6, press the soft key (
CLEAR
(for Mailbox 2 and 3)
Initial setting
).
SELECT

Set answering

Set mailbox2&3
).
SELECT
Set password
Ex. Entered 22.
Set password
Mailbox2 :22
^
=Mailbox2
V
=Mailbox3
), and press
SAVE