Table of Contents
Advertisement
If the ADSL2+ Router is not functioning properly, you can refer first to this chapter for simple
troubleshooting before contacting your service provider. This could save your time and effort
but if the symptoms persist, then consult your service provider.
Problems starting up the router
Problem
None of the LEDs
are on when you
turn on the router.
You have forgotten
your router login
and/or password
.
Corrective Action
Check the connection between the adapter and the router. If
the error persists, you may have a hardware problem. In this
case you should contact technical support.
Try the default login and password, please refers to Chapter
3. If this fails, you can restore your router to its factory
settings by holding the Reset button on the back of your
router for 6 seconds above.
Chapter 5
Troubleshooting
62
Advertisement
Table of Contents
