Keypad; Front Panel Keys - AOR AR5001D Operating Manual

2-4 KEYPAD

Keypad conventions
Most keys have secondary
restriction of available size, not all functions can be shown on the keypad printing.
For the secondary functions of the AR5001D, they are indicated with white characters above each
key. To access the s econdary function, press the [FUNC] key, and then press the respective key.

2-4-1 FRONT PANEL KEYS

POWER
This k ey is located on the upper left corner of the front panel.
Press this key to power on the AR5001D. To power off the AR5 001D, press and hold this key for
two seconds.
FUNC
The functio n key is used to select secondary functions on the keypad. When pressed, "F" in reverse
contrast appears on the top left corner of the LCD. The first function of the keys are printed on their
faces the secondary functions are printed in white directly above the corresponding key.
To cancel the "FUNC", press this key again.
Press and hold the [FUNC] key for two seconds to go into the FFT display mode. To cancel the FFT
display mode, press the [FUNC] key again.
SRCH - SR. MODE
Press this key to go into search mode and initiate SEARCH. If the receiver stops on an unwanted busy
channel during search, it can be resumed using the [UP] key or [DOWN] key or by rotating the main
dial.
To cancel search, press the [SRCH] key again or press the [VFO] key.
Press the [FUNC] key, and press the [SRCH] key to activate a sub menu where bank link, pause,
de la y, voice search, and auto-store function can be configured.
SCAN – SC. MODE
Press this key to go into memory recall mode.
The bank number can be selected using the sub dial, channe l nu mber using the main d ial and four
digit b ank/channel number using the numeric key switch.
their functions are printed on the panel. However, due to the
15