Auto Redial - Cisco C926 User Manual

To configure Hotline auto dial via Web interface
1. Setting Features.
2. Fill the number in the Hotline Number and Hotline Time-out.
3. Click to save the configuration.
Delete the hotline number and save the configuration, then now the Hotline auto dial is cancelled.

Auto Redial

When this option is set, if the phone you call is busy and does not set call waiting or voice mail, your LCD screen will prompt for Auto Redial, as
shown in figure.
If you press OK, your LCD will prompt Auto Redial Interval and Auto Redial Times
To configure Auto Redial via Web interface
1. Click Setting Features Auto Redial
2. Select On or Off for Auto Redial.
3. Fill the number 1~300 seconds for the Auto Redial Interval.