Cisco C926 User Manual page 72

3. Press or , or press the Send soft key, then the call is sending.
Using headset to place and answer calls for all time
1. Click webpage Setting Preference
2. HeadSet Priority Enable
3. Ring Device for HeadSet User Headset
4. Click to save the setting.
5. Press
Placing a call by hands-free speakerphone
1. Press the , or press the Line key, then you can hear the dial tone.
2. Press the number.
3. Press or press the Send soft key, then the call is sending.
To place a call by call history or Directory via Phone interface.
1. Press the History /Directory soft key (On the idle page) or Menu History /Directory
2. Press and to select the targeted one.
3. Press the Send soft key, or
Note:
1. The key is set to be a send key. For more information, refer to the Key as Send on page
2. During the call, you can also change among Headset, Handset or Free-speaker mode.
Making two calls with one line and one account
1. Press a line key and dial the phone number, then make a call.
2. Press Hold soft key and then press New Call soft key.
3. Dial another phone number,
4. Press the Send soft key, or
End a Call
Here shows to end a call during three modes:
To end a call by Handset
Press the End Call soft key or hang up the handset, or press
To end a call under Headset Mode
Press the End Call soft key or press
To end a call under hands-free speakerphone Mode
Press the End Call soft key or press
Note:
During the conference, to end the call is same as mentioned above.
Redial a Call
To redial the last placed call from the IP Phone:
Press directly when LCD is on the idle interface.
, or , or the corresponding line key, then the call is sending.
, then make the second call.
, or press .
, or press .