Cisco C926 User Manual page 43

3. Click Save and restart the phone.
4. Press the OK soft key to accept the change or the Cancel soft key to cancel. If you are using an xDSL modem, you can connect your phone to
the Internet via PPPoE mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain the IP
address. Contact your system administrator for the PPPoE user name and password.
To configure PPPoE via Phone interface:
1. Press Menu Settings Advanced Setting (password: admin) Network WAN Port PPPoE mode.
2. Enter the User ID and password
3. Click Save and restart the phone.