Unpacking And Handling; Mechanical Inspection; Special Attention - Security Tronix ST-D600IR2812-DSHB Installation Manual

Super wdr, 3d dnr true day & night infrared dome camera with heater & blower
Table of Contents

Advertisement

18. IR LED
19. Beam Spread
20. Night View Distance
21. Operating Temperature
22. Operating Humidity
23. Power Supply
24. Dimensions
25. Weight
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.
This symbol is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.
CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this
CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than

1. UNPACKING and HANDLING

Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material

2. MECHANICAL INSPECTION

Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose.
damaged or defective please contact your distributor or SecurityTronix at 1-610-429-1511 for
assistance.
3.

SPECIAL ATTENTION

a. The installer must comply with electrical safety standards. There must be sufficient
space between the camera's power supply and video line and any high voltage
equipment and/or cables.
b. To help ensure the camera's life and proper operation do not point the camera
towards the sun or strong light.
c. Do not install the camera in an environment where the temperature is above 140° F.
d. Do not install the camera near a magnetic field or a high-power motor.
e. Do not mount the camera near a radiator or heater.
f.
Only use a dry cloth to clean the camera. If there is dirt that is difficult to remove wipe
gently with a mild detergent. Never use strong or abrasive detergents.
g. Using a power supply other than specified will damage the camera.
v1.0 1/19/11
35 units, 850nm infrared LED; 20,000 hours
36° - 50°
Indoor 115', Outdoor 80'
-4F° - 140°F
30% - 80%
DC12V 500mA, AC24V 680mA (blower & heater on)
7"x4.5"
2.7 lbs.
INSTALLATION AND OPERATION
unit. No user serviceable parts are inside.
specified power source.
If equipment appears to be
3

Advertisement

Table of Contents
loading

Table of Contents