Supermicro X11SDV-8C+-TLN2F User Manual page 80

Super X11SDV-4C/8C/8C+/12C/16C/16C+-TLN2F User's Manual
Legacy Console Redirection
Redirection COM Port
Use this feature to select a COM port to display redirection of Legacy OS and Legacy OPROM
messages. The options are COM1 and SOL.
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
This submenu allows you to configure Console Redirection settings to support Out-of-Band
Serial Port management.
Console Redirection
Select Enabled to use a COM port selected for EMS Console Redirection. The options are
Disabled and Enabled.
*If the feature above is set to Enabled, the following features are available for
configuration:
Console Redirection Settings

This feature allows you to specify how the host computer will exchange data with the client
computer.
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are COM1 and SOL.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII character set. Select VT100+ to add color and function
key support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use
UTF8 encoding to map Unicode characters into one or more bytes. The options are VT100,
VT100+, VT-UTF8, and ANSI.
Bits per second
This feature sets the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 57600, and 115200 (bits per second).
80