Table of Contents
Advertisement
Super X11SDV-4C/8C/8C+/12C/16C/16C+-TLN2F User's Manual
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified. The options are Auto, (IO=3F8h; IRQ=4), (IO=2F8h; IRQ=4),
(IO=3E8h; IRQ=4), and (IO=2E8h; IRQ=4).
Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable serial port 2. The options are Enabled and Disabled. Enable
this feature for the next two features to display and only the Change Settings feature is
available for configuration.
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of the
serial port.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified. The options are Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3),
(IO=3E8h; IRQ=3), and (IO=2E8h; IRQ=3).
Serial Port Console Redirection
COM1
Console Redirection
Select Enabled to enable COM Port 1 for Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The options are
Disabled and Enabled.
*If the feature above is set to Enabled, the following features are available for
configuration:
Console Redirection Settings
Terminal Type
This feature allows you to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII Character set. Select VT100+ to add color and function
key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8 to
use UTF8 encoding to map Unicode characters into one or more bytes. The options are
VT100, VT100+, VT-UTF8, and ANSI.
76
Advertisement
Table of Contents
