Supermicro X11SDV-8C+-TLN2F User Manual page 37

Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened. Refer to
the table below for pin definitions.
OCulink Connector (P1_NVMe0)
The X11SDV-4C/8C/8C+/12C/16C/16C+-TLN2F features one internal OCuLink connector for
high-performance storage connectivity via the NVMe interface or for additional SATA storage.
P1-NVME0 is an OCuLink connector that, depending on the setting via jumper JNS1, can be
utilized as four SATA ports or a single U.2 NVMe port. NVMe provides lower data latency for
increased efficiency and storage performance.
LED3 VGA
Aspeed
AST2500
JTPM1
1
S-SATA0
X11SDV-4C-TLN2F
REV: 1.02
2 DESIGNED IN USA
DIMME1 DIMMD1
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
JIPMB1
Intel
X557-AT2
LAN1/LAN2
CPU
JF1
PWR OH HDD PWR
RST X NIC2 NIC1
ON FF LED LED
BT1
JBT1
DIMMA1
37
Chapter 2: Installation
1. Chassis Intrusion
2. OCulink Connector
IPMI_LAN
USB 2/3(3.0)
USB0/1
JF1
LED1
PJ1
DIMMB1