Supermicro X11SDV-8C+-TLN2F User Manual page 43

Manufacturing Mode Select
Close pins 2-3 of jumper JPME2 to bypass SPI flash security and force the system to operate
in the manufacturing mode, which will allow the user to flash the system firmware from a host
server for system setting modifications. Refer to the table below for jumper settings.
VGA Enable/Disable
JPG1 allows you to enable or disable the VGA port using the onboard graphics controller.
The default setting is Enabled.
JIPMB1
LED3 VGA
Aspeed
AST2500
2
JTPM1
1
S-SATA0
X11SDV-4C-TLN2F
REV: 1.02
DESIGNED IN USA
DIMME1 DIMMD1
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
VGA Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
Intel
X557-AT2
IPMI_LAN
USB 2/3(3.0)
LAN1/LAN2
USB0/1
CPU
JF1
PWR OH HDD PWR
RST X NIC2 NIC1
ON FF LED LED
BT1 LED1
JBT1
PJ1
DIMMA1
DIMMB1
43
Chapter 2: Installation
1. Manufacturing Mode
2. VGA Enable
JF1