Supermicro X11SDV-8C+-TLN2F User Manual page 74

Table of Contents

Super X11SDV-4C/8C/8C+/12C/16C/16C+-TLN2F User's Manual

NVMe Firmware Source

Use this feature to select the NVMe firmware to support booting. The default option, Vendor

Defined Firmware, is pre-installed on the drive and may resolve errata or enable innovative

functions for the drive. The other option, AMI Native Support, is offered by the BIOS with a

generic method. The options are Vendor Defined Firmware and AMI Native Support.

VGA Priority

Use this feature to select VGA priority when multiple VGA devices are detected. Select On-

board to give priority to your onboard video device. Select Offboard to give priority to your

graphics card. The options are Onboard and Offboard.

CPU SLOT7 PCI-E 3.0 X8 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in this slot.

The options are Disabled and Legacy (if the Boot Mode Select feature under the Boot tab

is set to Legacy), Disabled and EFI (if the Boot Mode Select feature under the Boot tab is

set to UEFI), and Disabled, Legacy, and EFI (if the Boot Mode Select feature under the Boot

tab is set to Dual).

Onboard LAN Option ROM Type

Use this feature to select which firmware type to be loaded for onboard LAN devices. The

options Legacy and EFI. Select Legacy to display and configure the Onboard LAN1 ~ LAN2

Option ROM features.

Onboard LAN1 Option ROM

Use this feature to select which firmware function to be loaded for LAN Port 1 used for system

boot. The options are Disabled and Legacy.

Onboard LAN2 Option ROM

Use this feature to select which firmware function to be loaded for LAN Port 2 used for system