Table of Contents
Advertisement
Answering system
Answering system settings
Message alert tone
When the message alert tone is set to On, and there is at least one
new message, the telephone base beeps every ten seconds. By
default, the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press
MENU/
SELECT
2. Press q
CID
then press
3. Press q
CID
then press
4. Press q
CID
then press
5. Press q
CID
6. Press
MENU
confirmation tone.
Notes:
The message alert tone beeps only if all the following conditions are met:
f
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
To temporarily turn off the message alert tone, see page 117.
f
to enter the main menu.
to scroll to Answering sys,
or p
DIR
/SELECT.
MENU
to scroll to Ans sys setup,
or p
DIR
/SELECT.
MENU
to scroll to Msg alert tone,
or p
DIR
/SELECT.
MENU
to choose On or Off.
or p
DIR
/SELECT to save the setting. You hear a
111
Remote code
>Msg alert tone
MSG ALERT TONE
>On
Advertisement
Table of Contents
