Deregistering Handsets; Deregister All Handsets From The Telephone Base - AT&T CL82229 Complete User's Manual

Dect 6.0 cordless telephone/answering system with caller id/call waiting
Hide thumbs Also See for CL82229:
Table of Contents

Advertisement

Appendix

Deregistering handsets

You may need to deregister your handsets if:
You have 12 registered handsets and need to replace a handset.
f
-OR-
You wish to change the designated handset number of your
f
registered handsets.
You must first deregister ALL handsets, and then register each
handset you wish to use again, one at a time.
Please read carefully through all the instructions on this page
before beginning the deregistration process.

Deregister all handsets from the telephone base

In addition to the cordless handsets,
this operation will also deregister all
cordless headsets or speakerphones
registered to your telephone base.
1. Make sure that all handsets are out
of the telephone base and chargers
before you begin deregistration.
2. Press and hold
telephone base for about ten
seconds (until the IN USE light starts
to flash). Release
3. Immediately press
flashing. (If the light stops flashing, start again with Step 1.)
4. It takes up to ten seconds to complete the deregistration
process. Before registering the handset again, wait for the
cordless handset screen to display To register HS, see manual.
5. To register the handset(s) to the telephone base again, follow
the registration instructions on pages 125-126.
FIND HS
on the
FIND
HS.
FIND HS
while the IN USE light is still
127

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl82219Cl82319Cl82419Cl82519

Table of Contents