Table of Contents
Advertisement
Answering system
Answering system settings
Answer on/off
By default, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so,
the answering system does not answer calls and record incoming
messages.
To turn the answering system on or off:
Using a cordless handset:
1. When the handset is in idle mode, press
MENU/
SELECT
2. Press q
CID
then press
3. Press q
CID
then press
4. Press q
CID
press
MENU
a confirmation tone.
When the answering system is on, the handset
shows ANS ON.
Using the telephone base:
Press /ANS ON/OFF to turn
f
the answering system on or
off. If the answering system
is turned on, it announces,
"Calls will be answered." If the
answering system is turned
off, it announces, "Calls will not
be answered."
When the answering system is
on, the light next to /ANS ON/OFF will be on.
Note: If the answering system is off and there is an incoming call, the system answers after
ten rings and announces, "Please enter your remote access code." For more information about
remote access, see page 123.
to enter the main menu.
to scroll to Answering sys,
or p
DIR
/SELECT.
MENU
to scroll to Answer ON/OFF,
or p
DIR
/SELECT.
MENU
to highlight On or Off, then
or p
DIR
/SELECT to save the setting. You hear
106
Play messages
>Answering sys
Record memo
>Answer ON/OFF
ANSWER ON/OFF
>On
Advertisement
Table of Contents
