Table of Contents
Advertisement
Answering system
Answering system settings
Voice guide
This feature is an alternative way for you to do the basic setup of
the answering system. You can follow the voice guide to record
your own announcement, set the number of rings, and set the
message alert tone.
This feature is only available on the cordless handset.
1. Press MENU/
in use.
2. Press
q
CID
press
MENU
3. Press
q
CID
press
MENU
"This voice guide will assist you with the basic
setup of your answering system."
4. Setup your answering system by inputting
designated numbers, as instructed in the voice
guide.
Notes:
You can press
f
If the system does not receive any input, it will announce "Sorry, I still have not received any input.
f
If you want to restart the voice guide, please enter the menu and select Voice guide under Answering
system. Good bye."
After a power outage, the handset prompts you to set the date and time, and Smart call blocker.
f
After these settings are done or skipped, the handset prompts if you want to set up the answering
system via voice guide. Press
If the answering system is off and there is an incoming call, the system answers after ten rings and
f
announces, "Please enter your remote access code." For more information about remote access, see
page 123.
on the handset when it is not
SELECT
or p
to scroll to Answering sys, then
/SELECT.
to scroll to Voice guide, then
or p
DIR
/SELECT. You hear a voice prompt,
/CANCEL to quit the voice guide at any time.
OFF
/SELECT to start the setup.
MENU
107
Play messages
>Answering sys
Answer ON/OFF
>Voice guide
Setting up
Answering sys...
Advertisement
Table of Contents
