LifeSpan TR5500iM Owner's Manual page 37

Operations
Screencasting (TR5500iM Only)
Screencasting is the term being used to describe the process of watching videos
on your treadmill by casting them from your smart device.
Getting Started
On the home screen press this icon
Instruction Screen
This screen is divided into two parts, Setup and Go.
Setup
This process uses your phone as a tool to help the treadmill setup its wifi
connection.
This setup process needs to be done only once. You can repeat this process in the
future if you would like to reselect a different wifi signal for your treadmill.
Step 1: Connect your smart device to the treadmill by opening up your wifi
settings. Look for a network that starts with the name EZCast. The full name of
the EZCast signal will appear on your treadmill screen. Make this selection on
your smart device. If needed, use the password that is displayed on your treadmill
screen to finish establishing the link between your smart device and the treadmill.
When complete a checkmark will appear on screen.
40
located on the bottom right.
Instruction Screen