LifeSpan TR5500iM Owner's Manual page 13

Step 6: Securing Console
A. Slide the console fully into the mounting brackets, being careful not to
damage any wires. If the console does not want to slide in completely,
loosen the four pre-installed M8 x 15L bolts (14) with the provided 6mm
Allen wrench to eliminate any friction.
B. Once the console is fully installed, tighten the four M8 x 15L Bolts.
Step 7: Cup Holder Attachment
A. Remove the two pre-installed M4 x 8L
screws (15) with the provided Phillip's
head screwdriver from the bottom of
the right cup holder.
Assembling Your Treadmill
14
Pre-installed
View from beneath
A
Pre-installed
6mm Allen M8 x 15L
Wrench
M4 x 8L
5mm Allen
Wrench w/
15
Phillips
(x4)
(x2)
15