Advertisement
Fitting the Thermostat to the Wall Plate
Ensure the terminal guard
is fitted into place over the
terminals of the wall plate
after procedure below.
Fit the two AAA batteries
provided, ensuring they are
i n s t a l l e d c o r r e c t l y a s
indicated by the terminal
markings in the battery
compartment.
Ensure that the electricity supply to the HRT4-B is
switched OFF.
Swing the thermostat into position on the wall plate
without fitting the battery terminal guard. Tighten the 2
captive screws on the underside of the unit.
19
Advertisement
