Delta CS-HB-30H User Manual page 86

a. Connect the black test lead to the "COM" jack and the red test lead to the "V/
anode "+" )
b. to select , enter the diode testing.
c. Connect test red lead across to the anode, the black lead to the cathode of the diode under testing.
d. Connect test red lead across to the cathode, the black lead to the anode of the diode under testing.
e .Tested diode,forward voltage low 30mv,there is sound indication ,then can finish the testing quickly
without view the screen.
Capacitance Measuring
a. Connect the black test lead to the" COM " jack and the red test lead to the "V/
b. Select " " to enter, enter the capacitance measurement.
c. The tester default auto range status, and manual range by press upward and downward key, Auto rang
by press the key "NEAR"
Manual range: 0.000nF
00.00nF
000.0nF
0.000uF
00.00uF
000.0uF
0.000mF
00.00mF
d. Before connect test leads across two sides of the capacitor under measurement, be sure that the
capacitor has been discharged fully.
Note:
a. The capacitance of a capacitor should be tested separately, should not test in
the installation of circuit.
b. To avoid electric shock, be sure the capacitors have been discharged fully before measuring the ca
pacitance of a capacitor.
→ 6.600nF range
→ 66.00nF range
→ 660.0nF range
→ 6.600μF range
→ 66.00μF range
→
660.0μF range
→ 6.600mF range
→ 66.00mF range
Page.81.
Ω
" jack. (the red lead
Ω
" jack.