Table of Contents
Advertisement
Network setting：Click "Network Set" to change the IP address. Some cameras cannot support change
IP address, so there is no change after saving.
Zoom in image : press the
mode.When the image is enlarged tap left, right, up or down on the image to move the whole image on
the screen
When the image is enlarged, if not operate on touch screen, it can operate by the keyboard, press the
key
to zoon in, press the key
to move image.
If it is network video input to the tester, as the tester supports resolution up to 1080p, the input image
will be very clear after it is enlarged. This is greatly helpful for the installers to ensure the IP camera's
video coverage and decide the IP camera's install site.
key to enter the zoom mode. Press it again to exit zoom
to zoom out, press upward and downward key
Page.28.
Advertisement
Table of Contents
