Table of Contents
Advertisement
b. select U
~ , enter the AC voltage measurement.
C.the tester default Auto range status, by click "AC auto range"
d. Manual range can be select , press the key "NEAR" to restore Auto range
e．Manual range: 0.000V → 6.600V range
00.00V → 66.00V range
000.0V → 660.0V range
000.0mV → 660.0mV range
DC Current Measuring (only manual range )
WARNING!
Shut down the power of the tested circuit, and then connect the meter with the circuit for measurement.
a. Connect the black test lead to the "COM " jack and the red test lead to the "mA" jack for a maximum
of 660mA current. For a maximum of 10A, move the red lead to the 10A jack.
A
b．select
, enter the DC current measurement,the screen display"DC current ",can select manual
range；
c．Manual range: 0.000mA → 6.6mA range
00.00mA → 66.00mA range
000.0mA → 660.0mA range
00.00A
d. Select the range to enter current measurement
Note:
◆ When only the figure "OL" is displayed, it indicates over range situation and the higher range has to
be selected.
◆ When the value scale to be measured is unknown beforehand, set the range selector at the highest
position.
◆ The maximum current of mA socket is 660mA; over-current will destroy the fuse, and will damage
the meter.
→ 10.00A range（use 10A socket）
Page.79.
Advertisement
Table of Contents
