Table of Contents
Advertisement
PSE power sourcing equipment. Tests PoE voltage
36
PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera)
37
3. Operation
3.1 Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be well
connected.
Pressing the key
Notice: Please use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed
Notice: When the Charge Indicator
charged. The charging time can be extended for about 1 hour and the charging time within 12
hours will not damage the battery.
Notice: Press the key
instrument works abnormally.
Multi-meter: the red and black multi-meter pen must insert the corresponding port.
Warnings: Instrument communication port is not permitted access circuit voltage over 6V,
otherwise damage the tester.
Warnings: Not allow insert multi-meter pen in the current
terminal to measure voltage
continuously can power on or off the tester.
turns off, the battery is approximately 90%
several seconds to restore the default settings when the
Page.8.
Advertisement
Table of Contents
