Table of Contents
Advertisement
Technical Information
Croma E 75 3-Jet handshower
Croma E 75 -Jet handshower
Clubmaster handshower
Raindance E 10 AIR handshower
Monsoon II handshower
Installation Considerations
•
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
•
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
•
The screws and anchors included with this set are suitable for use in a tile or other solid
surface wall. They are not suitable for use in an acrylic or fiberglass shower enclosure.
Please contact the manufacturer of the enclosure regarding recommended mounting loca-
tions, reinforcement requirements, and mounting hardware.
•
This unit does not include a wall supply. Use Hansgrohe model 27458XX3 or another
supply that complies with ASME A112.18.1/CSA B125.1 including ASME A112.18.3.
•
In Massachusetts, the maximum output temperature of the shower valve can be no higher
than 11°F.
.5 gpm
Full, massage, turbo massage
.5 gpm
Full, turbo massage
.5 gpm
Full, massage, soft aerated
.5 gpm
AIR, Whirl AIR, Balance AIR
.5 gpm
Full, massage, turbo massage
3
Advertisement
Table of Contents
