Mounting On A Wall - Supermicro SuperServer SYS-E302-12D-4C User Manual

2.3 Mounting on a Wall

The chassis can be mounted on a wall using a bracket (optional, MCP-290-30201-0B).
1. Secure the bracket to the wall where you want the server to be mounted by using four
screws through the holes around the center of the bracket, as shown below.
2. Flip the tab of the latch on the top of the chassis bracket to unlock the latch, then slide
the latch upward.
Locking Tab of Chassis Bracket Latch
Figure 2-1. Installing the Mounting Bracket
Figure 2-2. Chassis Bracket Latch
21
Chapter 2: Server Installation
Bracket Screws
Chassis Bracket Latch