Changing The Object Size; Moving An Object - Canon ImagePROGRAF iPF680 User Manual

iPF680

Changing the Object Size

Changing the Object Size

You can change the object size by means of mouse operation or by specifying a scaling value.
• The vertical-to-horizontal ratio remains unchanged when the object is enlarged or reduced.
Note
Resizing by means of mouse operation
1
Select an object.
2
Place the pointer at a corner of the selection box
around the object to show the arrow handle, and drag
this handle to change the object size.
Resizing by specifying a scaling value
1
Select an object.
2
Open the Format Dialog Box
3
Use Scaling to set the magnification for enlargement or reduction. You either enter numbers directly.
• You can input between 25 and 400.
• You can change the numbers by clicking either ▲ button or ▼ button.
Note
4
Click the OK button.

Moving an Object

Moving an Object

You can move the object position.
1
Select an object.
2
Place the pointer inside the selection box of the object
to show the crosshair handle, and drag it to move the
object.
User's Guide
.
P.335
➔
Changing the Object Size
337