Configuring Special Settings - Canon ImagePROGRAF iPF680 User Manual

Configuring Special Settings

6
Click the OK button.
Return to the Layout screen.
Check that the Binding settings are applied in the pre-
view screen.
7
Configure the settings in the Printing Wizard dialog box.

Configuring Special Settings

Configuring Special Settings
You can configure Special Settings from the imagePROGRAF Print Plug-In toolbar.
1
Click imagePROGRAF in the toolbar, and select Spe-
cial Settings.
2
Turn the checkbox for the item you want to change on or off.
Show progress indicator during plug-in startup
Center sheets and print areas
Ensure image quality when creating page sizes
Correct the print area when analyzing
3
Click OK to close the Special Settings dialog box.
274
Item
When this setting is off, hides the progress indicator that appears while the
plug-in is starting up.
When this setting is off, printing is performed without changing the position.
When this setting is on, printing is performed with the top, bottom, left, and
right margins layed out equally. When this setting is off, printing is performed
without changing the position.
This function is only valid in Microsoft Excel.
When this setting is on, documents are created at the maximum size. This
reduces the enlargement ratio during actual printing, which minimizes degra-
dation of the quality of photos, etc.
This function is only valid in Microsoft PowerPoint.
For data that cannot be processed with usual data analysis, the print area is
corrected and then the data is processed. When data analysis fails, you may
be able to print by turning on this checkbox.
This function is only valid in Microsoft Excel.
Details
User's Guide
iPF680