Checking The Hydraulic Oil Level - Fayat Group BOMAG BPR 35/60 D Operating Instruction

Maintenance – Annually

8.8.8 Checking the hydraulic oil level

Fig. 81
Fig. 82
Fig. 83
Topping up hydraulic oil and
bleeding the hydraulic system
82
Protective equipment: n
n
1. Park the machine in secured condition
„Parking the machine in secured condition" on page 51.
2. Adjust the steering rod with height adjustment so that the
area with the filler plug is horizontal.
3. Unscrew the filler screw.
4. Press the travel lever forward against the end stop and hold it
in this position.
5. The oil level must reach the mark on the steering rod head, if
necessary, fill in hydraulic oil.
Mark: approx. 40 mm (1.6 in) below the filler opening
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification.
BPR 35/60 D
Working clothes
Protective gloves
Ä Chapter 6.4