Advertisement
■ STATUS
Bit 0 to 7: Analog output module shows '0' at the same address.
Bit 8 to 10: Shows the power supply status.
15
Power supply
0 : Normal
TRANSMISSION DATA DESCRIPTIONS
■ BASIC MODULE
Transmitted data (word) depends upon the modules types.
OUTPUT DATA*
MODEL
(R7D to Master)
R7D-YV2x
■ EXTENSION MODULE
Transmitted data (word) for the extension module is added.
OUTPUT DATA*
MODEL
(R7D to Master)
R7D-EAx
R7D-ECx
■ STATUS
Status signal can be included in the transmission data
when the setting is enabled using the PC Configurator soft-
ware (model: R7CON). For details, refer to "STATUS in I/O
DATA DESCRIPTIONS".
OUTPUT DATA*
STATUS
(R7D to Master)
Enabled
Disabled
*1. Output Data means those sent to the master.
*2. Input Data means those received from the master.
SEN TRONIC
0
1 : Error
1
INPUT DATA*
2
(Master to R7D)
0
2
INPUT DATA*
1
2
(Master to R7D)
1
0
0
1
1
INPUT DATA*
2
(Master to R7D)
1
0
0
0
056 222 38 18
AG
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Remains "0"
Network power supply
Unused
Extension module external power supply
Unused
:
:
:
Unused
WIRING INSTRUCTIONS
■ SCREW TERMINAL (Output)
Torque: 0.5 N·m
• SOLDERLESS TERMINAL
Refer to the drawing below for recommended ring tongue
terminal size. Spade tongue type is also applicable.
Applicable wire size: 0.25 to 1.65 mm
Recommended manufacturer: Japan Solderless Terminal
MFG. Co., Ltd, Nichifu Co., Ltd
3.3 (.13) max
■ EURO TYPE CONNECTOR TERMINAL (DeviceNet)
Applicable wire size: 0.2 – 2.5 mm
Stripped length: 7 mm
mailbox@sentronic.com
www.sentronic.com
R7D-YV2
(AWG 22 to 16)
2
mm (inch)
2
EM-7802-D Rev.6 P. 6 / 10
Advertisement
