Charging Battery - Panasonic Lumix DMC-ZS10 Owner's Manual

Advanced features
Hide thumbs Also See for Lumix DMC-ZS10:
Table of Contents

Advertisement

Charging battery

Always charge before first use! (battery shipped uncharged)
About batteries that you can use with this unit
It has been found that counterfeit battery packs which look very similar to the genuine
products are made available to purchase in some markets. Some of these battery
packs are not adequately protected with internal protection to meet the requirements
of appropriate safety standards. There is a possibility that these battery packs may
lead to fire or explosion. Please be advised that we are not liable for any accident or
failure occurring as a result of use of a counterfeit battery pack. To ensure that safe
products are used we recommend that a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can be used
safely. The dedicated battery supports this function. The only batteries
suitable for use with this unit are genuine Panasonic products and batteries
manufactured by other companies and certified by Panasonic. (Batteries which
do not support this function cannot be used). Panasonic cannot in any way
guarantee the quality, performance or safety of batteries which have been
manufactured by other companies and are not genuine Panasonic products.
Insert the battery terminals and attach the battery
to the charger
Connect the charger to the electrical outlet
Plug-in type
Battery
Charger
(model-specific)
Charge the battery with the charger indoors
(10 °C - 30 °C (50 °F to 86 °F)).
Detach the battery after charging is
completed
The battery charger is in the standby condition when the AC power is supplied.
The primary circuit is always "live" as long as the battery charger is connected to
an electrical outlet.
10
VQT3G90
Inlet type
• The AC
cable does
not fit
entirely into
the AC input
terminal. A gap will remain.
Charging light
([CHARGE])
On: Charging in progress
(approx. 130 min. if fully
depleted)
Off: Charging complete
If light is flashing:
• Charging may take longer
than normal if battery
temperature is too high or
too low (charging may not be
completed).
• Battery/charger connector is
dirty. Clean with a dry cloth.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-zs10rDmc-zs10aDmc-zs10kDmc-zs10tLumix dmcsz10Dmc-sz10 ... Show all

Table of Contents