Recording the place of recording with GPS
(Continued)
Recording Mode:
Executing positioning immediately and updating your current location
If there is a discrepancy in the displayed information such as the location name or if
positioning has failed, move to a place where the signals from the GPS satellite can be
received more easily, and update the positioning.
Select [Repositioning] from the [GPS] menu
Positioning starts.
The GPS status indicator lights during positioning.
GPS status indicator
• When you select [GPS] or
(→41) and close the Quick menu, positioning will be executed.
■
Concerning the positioning intervals
Even if you do not manually update positioning, positioning is attempted automatically
immediately after the power has been turned on and at a fixed intervals after that
unless [GPS Setting] is [OFF].
When [GPS Setting] is [ON], positioning is tried at fixed time intervals even when the
power is off.
However, positioning is canceled under the following conditions.
• When the battery power is low and
• When the power has not been turned on for a certain length of time.
■
To display the GPS reception status
Select [GPS Setting] from the [GPS] menu.
Use the cursor button to select [INFO] and press [MENU/SET].
• You can start positioning by pressing [MENU/SET] again.
●
GPS reception status display
: Received GPS time
: Number of GPS satellite signals received
: Latitude
Longitude
78
VQT3G90
in the [GPS Setting] displayed in the Quick menu
has appeared.