For details about the setting procedure in the [Setup] menu (→38)
Item
[Calibration]
Perform these
adjustments if something
different from what
was touched has been
selected or if the camera
did not respond when it
was touched.
[Language]
Change display
language.
[Demo Mode]
View demonstration of
functions.
Press [MENU/SET].
Touch [+] which is displayed on the screen (in 5 places)
in sequence using the stylus pen (supplied).
Press [MENU/SET].
• If the proper positions were not touched, the touch
panel adjustments will not be performed. Touch the [+]
places again.
Set the language displayed on the screen.
[Stabilizer Demo.]
Extent of jitter is shown on graph (estimate)
Extent of jitter
Extent of jitter after correction
• During demo screen display, the Optical Image Stabilizer
switches ON and OFF every time [MENU/SET] is
pressed.
• Cannot display during Playback Mode.
[Auto Demo]: View introductory Slide Show
[ON]/[OFF]
• [Auto Demo] cannot be displayed on external devices
such as TVs.
Settings, notes
49
VQT3G90