Panasonic Lumix DMC-ZS10 Owner's Manual page 137

Flash
No flash emitted.
●
Flash set to [Forced Flash Off] (→52).
●
Flash cannot be emitted in the [Scenery], [Panorama Assist], [Night Scenery], [Handheld Night
Shot], [Sunset], [Starry Sky], [Fireworks], [Aerial Photo] and [High Speed Movie] Scene Modes, or
when using [Auto Bracket] or [Burst].
Multiple flashes are emitted.
●
Red-eye reduction is active (→52). (Flashes twice to prevent eyes appearing red.)
●
The Scene Mode is set to [Flash Burst].
Playback
Pictures have been rotated.
●
[Rotate Disp.] is set to
Cannot view pictures. There are no recorded pictures.
●
REC/PLAY switch is not set to
●
No pictures in built-in memory or card (pictures played from card if inserted, from built-in memory if
not).
●
Has the file name of the picture been changed on a computer? If so, it cannot be played back on the
camera.
●
The Playback Mode has been changed.
→ Set Playback Mode to [Normal Play] (→102).
Folder/file number displayed as [-]. Picture is black.
●
Picture edited on computer or taken on different device.
●
Battery removed immediately after picture taken, or picture taken with low battery.
→ Use [Format] to delete (→48).
Incorrect date displayed in Calendar Playback.
●
Picture edited on computer or taken on different device.
●
[Clock Set] is incorrect (→18).
(Incorrect date may be displayed in Calendar Playback on pictures copied to computer and then
back to camera, if computer and camera dates differ.)
White round spots like soap bubbles appear on the recorded picture.
●
If you take a picture with the flash in a dark place or indoors, white round spots may
appear on the picture caused by the flash reflecting particles of dust in the air. This is
not a fault. A characteristic of this is that the number of round spots and their position
differ in every picture.
[Thumbnail is displayed] is shown on the screen.
●
The pictures may have been recorded on another device. If so, they may be displayed with poor
picture quality.
.
(play).
137
VQT3G90