Panasonic Lumix DMC-ZS10 Owner's Manual page 77

Advanced features
Hide thumbs Also See for Lumix DMC-ZS10:
Table of Contents

Advertisement

For [GPS] menu setting procedures (→38)
When [GPS Setting] is set to [ON] or
In Recording Mode, an icon that indicates the positioning status is displayed on the
LCD monitor.
When positioning is executed successfully, your current location is stored in the
camera's memory, and the location name information appears on the screen.
Location name information
Even if GPS reception is good, it will take approximately 2 to 3 minutes
to successfully execute positioning under the following conditions; when
positioning is executed for the first time, or when positioning is executed after
the camera is turned off with the [GPS Setting] set to
again or when [GPS Setting] is set to [OFF].
The information of the current location stored in the camera's memory is deleted at
the following times. (The information recorded on the pictures during recording is not
deleted.)
• When [GPS Setting] is set to [OFF]
• When [GPS Setting] is set to
• When the setup settings are reset with [Reset]
Information recorded on pictures
If the positioning is executed successfully, the following information is recorded on the
still picture or the motion picture you recorded (except when [Rec Quality] is set to
[FSH] or [SH]).
• Latitude/longitude
• Location name information (Country/region, province/state, city/borough/county, town/village,
landmark)
appears when the picture is played back.
Location name information
The location name information consists of location names and landmarks that are
found via a search of the camera's database based on the latitude and longitude
that were acquired in positioning, and the most appropriate items are displayed
(Sometimes the nearest items are not displayed.)
• If there are no location names or landmarks "---" is displayed even if positioning is successful.
Even when "---" is displayed, in some cases location name information can be selected in [GPS
Area Select] (→79).
• In some cases, the landmark that you are looking for may not have been registered. Location
name information, such as landmarks, is current as of December 2010. (Landmark types →149)
The location name information (location name or landmark name) may be different
from the official name.
Icon
Time elapsed after successful positioning
In last 5 minutes
From 5 minutes to 1 hour ago
From 1 hour to 2 hours ago
More than 2 hours ago
Positioning failed
and then the camera's power is turned off
and then turned on
VQT3G90
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-zs10rDmc-zs10aDmc-zs10kDmc-zs10tLumix dmcsz10Dmc-sz10 ... Show all

Table of Contents