Changing The Recorded Place Name Information - Panasonic Lumix DMC-ZS10 Owner's Manual

For [GPS] menu setting procedures (→38)

Changing the recorded place name information

If there are other candidate locations for the positioning results, you can change the
information to nearby place names or landmarks.
• When other place name information can be selected,
name information.
Select [GPS Area Select] from the [GPS] menu
Use cursor button to select the item to change and press
[MENU/SET]
Use cursor button to select the place name or landmark from
the displayed candidates, and then press [MENU/SET]
■
If you do not wish to record place names and landmarks
In step , select [Delete all place-names] and place names and landmarks will not be
recorded.
Or, in step , if you select [Yes] when a message asking whether to delete place
names and landmarks lower than the selected place name, information of the place
name will not be recorded (e.g., [City/Town/Village] and [Landmark] when [County/
Township] is deleted).
• However, longitude and latitude will be recorded. If you do not wish to record them,
turn [GPS Setting] to [OFF].
• To return place names and landmarks set to not be recorded to the original setting
(i.e., to record the place names and landmarks), perform [GPS Area Select] again.
●
In large public parks or similar locations, landmarks may not be displayed, or
incorrect landmarks may be displayed. If you cannot select the desired landmark in
[GPS Area Select], perform [My Landmark] (→80) before recording or [Place-Name
Edit] (→107) after recording.
appears in front of the place
VQT3G90
79