Touching The Screen And Adjusting The Focus And Exposure (Touch Af/Ae Function) - Panasonic Lumix DMC-ZS10 Owner's Manual

Touching the screen and adjusting the focus and
exposure
Recording Mode:
This function enables the focus and exposure to be set when you touch the subject
displayed on the screen.
●
The touch AF/AE function may fail to work under some recording conditions such as
when the subject is too small or the recording location is too dark.
●
The touch AF/AE function will not work along the edges of the screen.
●
During [Intelligent Auto] Mode, the camera will determine the touched subject to be the
optimal scene.
(Touch AF/AE function)
Touch the place where you want
to set the focus and exposure
• When [AF Mode] is set to
Detection), the Face Detection function
continues to operate, but the focus is
adjusted to the place where you touched.
• When [AF Mode] is set to
the camera locks onto the subject, and it
automatically continues to focus on the
subject and adjusts the exposure of the
subject as the subject moves.
Press the shutter button halfway
to bring the subject into focus,
and then press the button fully to
record the subject
• To release the touch AF/AE function
→ Touch
.
(Face
(AF Tracking),
25
VQT3G90