Table of Contents
Advertisement
2. Turn on the PC.
The screen image appears.
If an image does not appear, see
Attention
• When connecting for the first time or changing the connection method, display settings such as
resolution and display scale may not be appropriate. Check if the settings for the PC are properly
configured.
• For power saving purposes, it is recommended that the Power button be turned off. When not
using the monitor, you can turn off the main power supply or disconnect the power plug so that
the power is cut completely.
Note
• In order to maximize the monitor's lifespan by impeding brightness degradation and to reduce
power consumption, carry out the following:
– Use the power saving function of the PC or monitor.
– Turn off the monitor after using it.
2.4 Adjusting the Screen Height and Angle
Hold the top and bottom or left and right edges of the monitor with both hands, and adjust
the screen height, tilt and swivel the screen to the optimum position for performing tasks.
Attention
• After the adjustment is finished, make sure that the cables are correctly connected.
• After adjusting the height and angle, pass the cables through the cable holder.
3 No-Picture Problem [} 24]
Installation / Connection | 2
for additional advice.
23
Advertisement
Table of Contents
