Table of Contents
Advertisement
1 | Introduction
1.1.4 Monitor operation from the mouse and keyboard
Using the RadiCS / RadiCS LE monitor quality control software, you can perform the
following monitor operations using the mouse and keyboard:
• Switching CAL Switch modes
• Switching input signals
• Function that assigns any CAL Switch mode to a part of the screen and displays an
image (Point-and-Focus)
• Entering power saving mode (Backlight Saver)
1.2 Package Contents
Check that all of the following items are contained in the package. If any of these are
missing or damaged, contact your dealer or local EIZO representative.
Note
• It is recommended that the box and packing materials be kept in storage so that they can be
used to move or transport this product later on.
• Monitor
• Power cord
• Digital signal cable (DisplayPort - DisplayPort): PP300 x 1
• USB cable: UU300 x 1
• EIZO LCD Utility Disk (CD-ROM)
• Instructions for Use
1.2.1 EIZO LCD Utility Disk
The CD-ROM contains the following items. Refer to "Readme.txt" on the disk for software
startup procedures or file reference procedures.
• Readme.txt file
• RadiCS LE monitor quality control software (for Windows)
• User's Manual
– Instructions for Use of this monitor
– Monitor Installation Manual
– RadiCS LE User's Manual
• Outline dimensions
1.2.2 RadiCS LE
RadiCS LE enables you to perform the following quality control and monitor operations. For
more information about the software or setup procedures, refer to RadiCS LE User's
Manual.
Quality control
• Executing calibration
16
Advertisement
Table of Contents
