Replacing The License Plate Light Bulb; Replacing The Auxiliary Light Bulb - Yamaha FZ-07 2015 Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
4
3
5
4 3
1. License plate light unit
2. Collar
3. Washer
4. Nut
5. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU59890
1. License plate light bulb
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
2
nuts.
Replacing the auxiliary light
bulb
1
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit. (See
2. Remove the auxiliary light bulb
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
7-36
page 7-33.)
socket (together with the bulb) by
turning it counterclockwise.
1
pulling it out of the socket.
EAU46405
7