Replacing A Turn Signal Light Bulb - Yamaha FZ-07 2015 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
1. Turn signal light unit
7
2. Screw
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
EAU43006
1
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by
2
pulling it out.
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light unit by
1
1
7-35
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]