Storage Compartment - Yamaha FZ-07 2015 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
TIP
Make sure that the screwdriver is se-
curely positioned between its holders,
and then position the cable loops to-
ward the middle of the screwdriver be-
fore installing the passenger seat.
4
1
2
3
1. Helmet
2. Helmet holding cable
3. Screwdriver
4. Holder
5. Install the passenger
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Remove the screwdriver, then re-
move the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screw-
driver in its original position, and
then hook the helmet holding ca-
ble over the hook on the bottom of
4
the passenger seat.
1
seat.
1. Screwdriver
2. Helmet holding cable
3. Hook
4. Install the passenger seat.
[EWA10162]

Storage compartment

1. Storage compartment
The storage compartment is located
under the passenger seat. (See page
2
4-16.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
3
 Do not exceed the load limit of
4-18
1
WARNING
1.5 kg (3 lb) for the storage com-
partment.
EAU14465
EWA10962