Display & Button Setup - Kenwood DNR1008RVS Instruction Manual

Setup
Ñ
Change the device name for
bluetooth
1
Touch [Device Name] in the Connections
& AV setting menu.
h Change Device Name screen appears. h
2
Touch and hold [
3
Input the device name.
4
Touch [Enter].
Ñ
Change the PIN Code
1
Touch [PIN Code] in the Connections & AV
setting menu.
h Change PIN Code screen appears. h
2
Touch and hold [
3
Input the PIN Code.
4
Touch [SET].
Ñ
Change the device name for
Wireless Mirroring
1
Touch [Device Name] in the Connections
& AV setting menu.
or
Touch [Wi-Fi SETUP] and then touch
[Device Name].
h Change Device Name screen appears. h
2
Touch and hold [
70
].
].
].
3
Input the device name.
4
Touch [Enter].
Display & Button Setup
1
Press the [ ][HOME] button.
2
Touch [ ].
3
Touch [SETUP].
h SETUP Menu screen appears. h
4
Touch [Display & Button].
h Display & Button setting menu appears.
h
5
Set each parameter as follows.
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display and buttons.
[ON]: Dims the display and buttons.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
[NAV-SYNC]: Turns the dimmer function on
or off according to the information (day/
night) from the navigation.
[OSD Clock]
■
Select if you want to display the clock while
the screen is off, or while watching video files
(USB, SD), etc.
"ON" (Default)/"OFF"