Setup; Monitor Screen Setup; Connections & Av Setup - Kenwood DNR1008RVS Instruction Manual

Setup

Setup
1
Press the [ ][HOME] button.
2
Touch [ ].
3
Touch [SETUP].
See the following section for each
setting.
• Set up connections and AV (P.68)
• Set up display and button (P.70)
• Set up the user interface (P.72)
• Set up camera (P.63)
• Set up systems (P.73)
• Set up navigation (P.20)

Monitor Screen Setup

You can adjust the image quality of video,
menu screen, etc.
1
Press the [MENU]/[ATT] button.
h Popup menu appears.
h
2
Touch [Screen Adjustment].
h Screen Adjustment screen appears.
h
3
Adjust each setting as follows.
68
■ [Backlight]/[Contrast]/[Black]/
[Brightness]/[Color]/[Tint]
Adjust each setting.
■ [Aspect]
Select a screen mode.
[Full]: Changes the aspect ratio of video and
displays video fully on the screen.
[Normal]: Displays video at the ratio of 4:3.
[Auto]:
USB device and SD card: Displays video
fully (vertically or horizontally) with no
ratio change.
NOTE
• Settings to adjust vary depending on the current
source.
Connections & AV Setup
NOTE
• Some items in the Connection Setup are disabled
while using Apple CarPlay.
You can set connections and AV parameters.
1
Press the [ ][HOME] button.
2
Touch [ ].
3
Touch [SETUP].
h SETUP Menu screen appears.
h
4
Touch [Connections & AV].
h Connections & AV setting menu appears.
h
5
Set each parameter as follows.
■ [Bluetooth]
Turns the Bluetooth function on or off.