Special Setup; Display Setup - Kenwood DNX695S Instruction Manual

2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].

Special Setup

You can setup Special parameters.
1
Press the [ ] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Special].
h Special screen appears.
h
4
Set each item as follows.
■ [DEMO]
Set the demonstration mode. Default is "ON".
[SETUP Memory]
■
Locks or unlocks the Audio SETUP Memory/
Recall/Clear.
[Audio SETUP Memory]
■
Memorizes the current audio setting.
• Fader/ Balance, Speaker / X'over, Equalizer
(User Preset, SW Level), Position/DTA,
Sound Effect (P.78)
[Audio SETUP Recall]
■
Recalls the memorized audio setting.
[Audio SETUP Clear]
■
Clears the AUDIO SETUP Memory and the
currently memorized audio setting.
■
Check the software version of this unit.
].
(P.75)
2
■
Displays the open source licenses.
■
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ
Software Information
Check the software version of this unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.

Display Setup

1
Press the [
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Display].
h Display screen appears.
h
[Software Information]
[Open Source Licenses]
[Initialize]
] button.
Setting Up
75
English