Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX7100/DNX710EX Serial number...
Contents How to read this manual Safety precautions Notes Navigation Control Using the Navigation System Accessing the SD Memory Card Insertion Slot Watching DVD/VCD Functions During the Playback Screen Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen DVD Disc Menu VCD Zoom Control...
HD Radio Control Functions When Displaying the Easy Control Panel Functions while Displaying the Control Screen Seek Mode Auto Memory Manual Memory Source Select Displaying the Control Screen External Device Power Supply Control External Device Power Supply Control Muting Audio Volume upon Reception of Phone Call Muting Audio Volume upon Reception of Phone Call...
How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different.
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit.
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • We recommend the use of <Security Code Setup>...
Notes Handling CDs • Do not touch the recording surface of the CD. • Do not stick tape etc. on the CD, or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the center of the disc and move outward.
Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Symbol Description Indicates a region number. The discs with this mark can be played with any DVD player.
If you connect an iPod with commercially available USB cable, it is treated as a mass storage class device. • For the supported formats and types of USB device, refer to www.kenwood.com/usb/. • Attach the correct extension for the Audio file (AAC: ".M4A", MP3: ".MP3", WMA: ".WMA") •...
• Using an unsupported USB device can result in abnormal playback or display of the audio file. Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device. •...
Basic Operations Attenuates the volume Press it again to cancel muting. Adjusts the volume Turns power ON/OFF Press the button to turn on the power. When the button is pressed and held down for 1 second or more, the power is turned off. DNX7100 Sets the Loudness Press it for more than 1 second to turn the...
Playing a disc Press  (Eject) button to open the operation panel. When you load a disc into disc loading slot, the disc starts playing. If a menu appears, when playing a video disc, select the desired item. ⁄ • See <List of playable discs> (page 8) for a list of supported discs and formats. Removing a disc Press  (Eject) button to open the operation panel.
Basic Operations Switches the function screen The function control screen switches in the following order each time you press the button. Picture & Easy Control Panel Source Control Screen Picture Panel (OFF) The following buttons are always displayed on the source control screen. DNX7100 1 Displays the Source Select screen.
Playing a USB device When connecting a USB device, playback starts automatically. Removing the USB device Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 39). ¤...
Navigation Control Sets and controls the navigation system function. Using the Navigation System Displays the navigation system screen and makes the navigation function available. Displaying the navigation screen Press several times until the navigation screen appears. Setting the navigation system function Touch the navigation system button displayed on the screen.
Watching DVD/VCD You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, refer to <Basic Operations> (page 12). • Set the remote controller mode switch to "DVD" mode before starting operation, refer to <Remote Controller mode switch> (page 88).
Watching DVD/VCD Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 1 Switches the source. 2 Stops playing. When pressed twice, the disc is played from its beginning when you play it in the next time.
4 Selects a chapter, a scene or a track. When the DVD-VIDEO/VCD is paused, touch this button to start single-frame stepping. 5 Plays or pauses. 6 Slow Forwards or Backwards. (during DVD play) 7 Switches the button display. 8 Switches the Repeat Play operations in the following sequence.
Watching DVD/VCD Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. ⁄ • To cancel Highlight Control, press [V.SEL] button. Select Disc Menu options Disc Menu 9 Calls the Menu Control.
VCD Zoom Control Displays an enlarged VCD screen. Display the Zoom Control screen 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Clears the Zoom Control button. Direct Search You can search for a DVD/VCD chapter, scene or track by entering its number.
Music Disc & Audio File Listening You can recall various control screens during CD/Audio file/Disc Changer playback. • For the basic method of how to play a music disc/audio file, refer to <Basic Operations> (page 12). • Refer to <List of playable discs> (page 8) for playable discs. •...
Functions While Displaying the Control Screen Switches to control screen to use various playback functions. During CD playback 1 Music information display Selects the Disc Name (See <Set Disc Name>, page 26), Disc Text or Track Text. When is appeared, the text display is scrolled by pressing it.
Music Disc & Audio File Listening During Audio file playback ; Music information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. a Ejects a disc s Fast Forwards or Fast Backwards.
During playback on disc changer Q Music information display Selects the Disc Name (see <Set Disc Name>, page 26) or Track Text mode for text display. When is appeared, the text display is scrolled by pressing it. W Selects a track. Starts Fast Forward or Fast Backward when it is held down.
Music Disc & Audio File Listening Set Disc Name Assigns a name to a CD. Play a CD you wish to name Start Name set Enter the name See <Character Entry> (page 56) for information on how to enter a name. End Name set DNX7100 Folder Select (Function of Audio File)
Disc Select (Function of Disc Changer) Displays a list of discs in the Disc changer and allows you to select the disc to listen. Start Direct Select Select a Disc 1 Lists the discs. Plays when touched. 2 Switches the list name to Disc name or Disc Text.
Video File/Picture File Watching You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and picture file (JPEG file). Function During Playback Screen Basic functions are available even when the playback screen is displayed. Display the playback screen.
Functions While Displaying the Control Screen Switches to control screen to use various playback functions. 1 Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. 2 Ejects a disc.
Video File/Picture File Watching Picture Control Adjusting the video display. Start Picture Control Adjust the video display 1 Reverses the picture horizontally. 2 Rotates counter clockwise. 3 Rotates clockwise. 4 Ends Picture Control. DNX7100 Folder Select Searches folders and Video files/Pictures stored in media and devices according to hierarchy.
Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, refer to <Basic Operations> (page 12). • Set the remote controller mode switch to "AUD" mode before starting operation, refer to <Remote Controller mode switch> (page 88).
Radio Listening 6 Switches the button display. 7 Turns the CRSC function On or Off. (Only when receiving the FM broadcast) 8 Selects the Auto Memory mode. (Refer to page 32 for the <Auto Memory>) 9 Switches the Seek mode. (Refer to page 32 for the <Seek Mode>) p Switches the number of lines displayed in the Information Display.
Start Auto Memory Touch Auto Memory terminates when 6 stations are stored or when all stations are tuned in. ⁄ • The operation ends automatically if you do not operate within 10 seconds. Manual Memory Stores the current receiving station in memory. Select a station you wish to store in memory Store in memory...
Radio Listening Radio Text You can display the radio text. (Only when receiving the FM broadcast). Select a station Display the radio text 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by pressing it.
Example: When you receive FM 92.1 MHz WXYZ Example: When you receive AM 810 kHz ⁄ • The operation ends automatically if you do not operate within 10 seconds. Traffic Information When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically.
(Resume Function). • If the played song is not a video content, "No iPod Video Signal" is displayed on the video screen. • While connecting an iPod, "KENWOOD" appears on the iPod and the iPod's control is disabled. DNX7100 Functions when Displaying the Easy Control Panel Displays a floating control panel in the screen.
Functions while Displaying the Control Screen Switches to control screen to use various playback functions. 1 Music/Video Information Display Selects the Title, Artist Name, Album Name or iPod Name. When is appeared, the text display is scrolled by pressing it. 2 Fast Forwards or Fast Backwards.
iPod Control iPod List Lists and searches music/video contained in the iPod. Display the iPod List Select music/video 1 Switches list page. 2 Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it.
USB Device Control You can control and listen to songs in your USB device by simply connecting it to the USB connector of this unit. • For the connection of a USB device, refer to <Basic Operations> (page 12). Functions when Displaying the Easy Control Panel Displays a floating control panel in the screen.
USB Device Control 4 Selects a file. 5 Plays or pauses. 6 Switches the button display. 7 Starts or stops Scan Play (that plays the beginning of each music one after the other). 8 Repeats to play (the present music). 9 Starts or stops Random Play (to play music in random order).
Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. Start Folder Select Select music 1 Scrolls the list. 2 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 3 Moves to the top hierarchy level.
TV Watching Various control screens appear in the TV Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Functions During TV Screen Basic functions are available even when the TV screen is displayed. Display the TV screen 1 TV Band Number Display 2 Memory Number Display 3 Channel Number Display...
Functions While Displaying the Control Screen Switches to control screen to use various playback functions. 1 Channel information display 2 Switches to TV1 or TV2. 3 Select a channel. Use the <Seek Mode> (page 43) to change the channel tuning sequence. 4 Switches the button display.
TV Watching Auto Memory Stores stations with good reception in memory automatically. Select a band you wish to store in memory Select the Auto Memory mode Start Auto Memory Auto Memory terminates when 6 stations are stored or when all stations are tuned in. ⁄...
Select a station 1 Memorized stations are displayed. Touch to tune in. 2 Returns to the original screen. Set Station Name Assigns a name to a station. Select a station you wish to name Start Name set Enter the name See <Character Entry>...
Video Watching Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 1 Switches the source. 2 Displays the external device control screen. See <External Device Power Supply Control> (page 54) 3 Displays the Screen Control screen. (page 57 for the <Screen Control>) ⁄...
Satellite Radio Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only) Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 1 Switches the source.
Satellite Radio Control (North American sales area only) 6 Switches the Seek mode. SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other. 7 Switches the number of lines displayed in the Information Display. 8 Indicates current Seek mode 9 When can recall the channel on memory.
Channel Memory Stores the current receiving channel in memory. Select a channel you wish to store in memory Store in memory Continue to touch until the memory number appears. : Press for # seconds. Direct Channel Search Tuning in by entering the desired channel number.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Functions When Displaying the Easy Control Panel Displays a floating control panel in the screen. 1 Switches the source. 2 Switches the band (HD FM1/2/3, HD AM).
6 Selects the Auto Memory mode. Refer to <Auto Memory> (page 52) 7 Switches the Seek mode. Refer to <Seek Mode> (page 51) 8 Switches the number of lines displayed in the Information Display. 9 Selects the channel on memory. p The Receive mode switches in the following order.
HD Radio Control Auto Memory Stores stations with good reception in memory automatically. Select a band you wish to store in memory Select the Auto Memory mode Start Auto Memory Auto Memory terminates when 6 stations are stored or when all stations are tuned in. DNX7100 : Press for # seconds.
Source Select The source you wish to listen to can be selected quickly. Displaying the Control Screen Display control screen Press several times until the Control Screen appears. Display source select screen Select a source 1 Switches to the selected source. 2 Scrolls the source display.
External Device Power Supply Control Controlling the external device power supply. External Device Power Supply Control Display the EXT SW Control screen [EXT SW] appears when the control screen of each source or Easy control panel is displayed. Control the external device power supply 1 You can turn on or off the external device power supply.
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone Call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends...
Character Entry How To Use the Character Entry Screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen 1 Shifts the cursor. 2 Enters a space. If you erase a character, locate the cursor on it and touch this button.
Screen Control Screen Control Setting the monitor screen. Display Easy control panel Display the Screen Control screen Adjust the picture quality 1 Brightness Control 2 Tint Control Displayed for an NTSC system image on TV, Video, iPod or Rear View Camera. 3 Color Control Displayed on the TV, Video, iPod or Rear View Camera screen only.
Hands Free Unit Control • You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual of the Bluetooth Hands Free Box as well. Control Screen Function Displaying the control screen and using various functions.
y Displays the calling and called phone numbers. If you have registered a phone number in the Phone Book, the destination person name is displayed. ⁄ • While your car is moving, some functions are disabled for safety’s sake. The buttons associated with the disabled functions become ineffective if pressed.
Hands Free Unit Control Quick Dialing You can register up to 3 phone numbers for quick dialing. To register a phone number: Display a phone number you wish to register See the <Calling by Phone Book> (page 60), <Redialing> (page 62) and <When Dialing> (page 59).
Phone Book List screen 4 Scrolls the list. 5 Enters the destination name. 6 Cancels the operation. 7 Returns to the Hands-Free Control screen. Select a destination you wish to call Confirm the destination The Hands-Free Control screen appears again. The selected destination data is displayed.
Hands Free Unit Control Redialing You can redial, one of the last 10 phone numbers that you have called or received. Display the Search for Outgoing Calls or Incoming Calls screen : Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears.
Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. Hands-Free Set Up screen 1 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 2 Sets a ringing tone output position.
Hands Free Unit Control Deleting the Hands-Free Phone You can cancel a registration of Hands-Free phone. Display the Hands-Free Set Up screen Display the Phone Delete list Phone Delete screen 1 Selects the cell-phone to be deleted from the list. 2 Returns to the Hands-Free Set Up screen.
Setup Menu You can set up various receiver parameters. Setup Menu Displays the Setup menu to set various functions. Display the control screen Press several times until the control screen appears. Display the SETUP Menu Select the setup item 1 The selected setup screen appears. 2 Scrolls the setup menu.
Crossover Network Setup You can set a crossover frequency of speakers. Select the speaker to set the crossover 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen.
Setup menu 6 Sets an angle mark display. ( 7 Selects the screen display mode.*1 ( "16:9": Displays wide pictures. "4:3 LB": Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen). "4:3 PS": Displays wide pictures in the Pan &...
Set the language you use Parental Level Setup Sets a parental level. Display the Parental Level code number screen Refer to <DVD Setup> (page 67) and touch [Parental Level]. 1 Enters a code number. 2 Cancels the current setup and returns to the DVD SETUP 2 screen.
Setup menu ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock, anybody can play it back even when you have set the parental lock.
iPod Setup Performs setup when using iPod. Display the iPod SETUP screen Touch [iPod SETUP] in the SETUP Menu (page 66). Setup each item 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. 3 Returns to the original screen. ⁄...
Setup menu AV Interface Setup You can set audio and visual (AV) interface parameters. Display the AV Interface screen Touch [AV Interface] in the SETUP Menu (page 66). Setup each item 1 Sets a name to be displayed when you select a system that is connected via the AV INPUT port.
9 Mutes the volume during voice guidance of the navigation system. ( When turned "On", the volume level drops for voice guidance. p Sets a selecting method of audio source from the Navigation system.( "On": Allows you to select the audio source input from the Navigation system interface selecting it on Source Select screen.
Setup menu 5 Sets an on-screen display of the iPod Playback screen. ( Auto) "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. 6 Sets an on-screen display of the navigation screen.
Select the image to load Background Memory Folder Select usb1 sample images1 sample images2 sample images3 sample images4 sample images5 1 Returns to Media Select screen. 2 Returns to the previous folder. 3 Scrolls the list. Load the image Rotation Angle Select/Memory aaaaa 4 Rotates the image.
Setup menu Background Select Selects a image for background. Select Background Select screen Select a image for background Background Change 1 Returns to the original screen. 2 Returns to the initial background. Set the image as the background Background Change DNX7100 Touch Panel Adjustment You can adjust the touch panel operations.
Clock Setup You can adjust the clock time. Display the Clock Setup screen Touch [Clock] in the SETUP Menu (page 66). Setup the Clock 1 Clock time display 2 Adjusts hours. 3 Adjusts minutes. 4 Sets "00" minute. Setup examples: 3:00~3:29 \ 3:00 3:30~3:59 \ 4:00 5 Sets the clock time in synchronization with the time data sent from the RDS station.
Setup menu Monitor Setup You can adjust the position, picture quality and the screen mode of the monitor. Displaying the Monitor SETUP screen Touch [Monitor SETUP] in the SETUP Menu (page 66). Setup each item 1 Brightness Control 2 Contrast Control 3 Black Level Adjustment 4 Dimmer Mode Setup "SYNC": Turning the Dimmer function On or...
⁄ • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed. • The picture qua¡lity can be set for each source. Full picture mode (FULL) Zoom picture mode (ZOOM) Justify picture mode (JUST)
Setup menu Enter a security Code Input four-digit number. Register your security code Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. ⁄ • If you enter a different security code, the screen returns to Step 3 (for the first code entry).
Deactivating Security Code To deactivate the Security Code function. Display Security Code Setup screen Touch [Touch] in the Set Up Menu (page 66). Start to cancel a registration of the Security Code Enter a security Code Input by four-digit number. Register your security code Now, your security code is cleared.
Setup menu Setup Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. Display the SETUP Memory screen Touch [SETUP Memory] in the SETUP Menu (page 66).
Quit memorization/recalling of settings EXT SW Setup Setting up power specification of the external device for which the power is controlled from this unit. Display the EXT SW SETUP screen Touch [EXT SW SETUP] in the SETUP Menu (page 66). Perform EXT SW Setup Setting EXT SW Control 1 (EXT SW1) 1 Sets the name of the external device.
Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. Display the control screen Press several times until the control screen appears. Display the Audio Control menu Select the Audio Control item 1 Switches to the selected Audio Control screen.
6 Adjusts the bass boost of the B.M.S power amplifier (optional accessory). 7 Sets the center frequency of bass boost you have set for "AMP Bass". If you set the center frequency to "Low", it will be dropped approximately 20% to 30%. 8 Adjusts the subwoofer volume.
Audio Control Tone Setup You can set a Tone curve. Display the Tone screen See <Equalizer Control> (page 85). Set the Tone 1 Bass adjustment items are displayed. 2 Middle adjustment items are displayed. 3 Treble adjustment items are displayed. 4 Bass DC Extend settings (Only when Bass is selected) If turned "On", it extends the bass...
⁄ • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source.
Remote Controller This unit can be operated using the Remote Controller supplied with the unit. ¤ • Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals while driving. •...
Common operations (AUD mode) Source switching Switches to the source to be played. DISP V.SEL ZOOM MENU POSITION • • ENTER • Volume control Adjusts the volume. VIEW MAP DIR ANGLE FM + ZOOM AM− 2 ZONE Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume.
Remote Controller DVD/VCD/CD/Audio files (DVD mode) Folder search Selects the folder to be played. ANGLE FM + ZOOM AM− 2 ZONE Track search and file search Selects the track or file to be played. VIEW MAP DIR ANGLE FM + ZOOM AM−...
DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. • ENTER • • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE FM + SUBTITLE Switches the subtitle language.
Remote Controller Radio (AUD mode) Band switching Switches to bands received by the unit. ANGLE FM + ZOOM AM− 2 ZONE Station selection Switches to broadcast stations received by the unit. VIEW MAP DIR ANGLE FM + ZOOM AM− 2 ZONE Direct tuning After pressing this key, use the keypad to specify the broadcast station you wish to receive.
ROUTEM Displays Route Option menu. • ENTER • • NAVI AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE VIEW Switches between 2D and 3D map displays. NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM CANCEL VOICE...
Help? Troubleshooting Some functions of this unit may be disabled by some settings made on this unit. • Cannot set up the subwoofer. • Cannot set up subwoofer phase. • No output from the subwoofer. • Cannot set up the low pass filter. •...
HD Radio source No sound can be heard, or the volume is low. ✔ The preset broadcast station is not transmitting in the mode that was set with <HD Radio Control> (page 50). ☞ Please set the receive mode setting to "Auto".
Mecha Error : The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error : An unplayable disc is inserted.
DVD Language Codes Code Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic...
Specifications Monitor section Picture Size : 6.95 inches (diagonal) wide : 156.2 mm (W) x 82.4 mm (H) Display Sytem : Transparent TN LCD panel Drive System : TFT active matrix system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement...
AM tuner section Frequency Range (10 kHz) : 530 kHz – 1700 kHz Usable Sensitivity : 28 dBμ Video section Color System of External Video Input : NTSC External Video Input Level (RCA jacks) : 1 Vp-p/ 75 Ω External Audio Max Input Level (RCA jacks) : 2 V/ 25 kΩ...
Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.