Volume Offset; Sound Effect - Kenwood DNR1008RVS Instruction Manual

Volume Offset

Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1
Press the [ ][HOME] button.
2
Touch [ ].
3
Touch [Audio].
h Audio screen appears.
h
4
Touch [Volume Offset].
5
Touch [+] or [-] to adjust the level.
■ [Initialize]
Returns to the initial settings.
Touch [Initialize] and then touch [YES] on
the confirmation screen.
NOTE
• If you have increased the volume first, then
reduce the volume using "Volume Offset".
Switching the current source to another source
suddenly may output extremely loud sound.

Sound Effect

You can set sound effects.
1
Press the [ ][HOME] button.
2
Touch [ ].
3
Touch [Audio].
h Audio screen appears. h
4
Touch [Sound Effect].
5
Set each parameter as follows.
[Bass Boost]
■
Set the amount of bass boost
"OFF"/"1"/"2"/"3".
■ [Loudness]
Set the amount of boost of low and high
tones.
"OFF", "Low", "High"
[Drive Equalizer+]
■
The sound quality is automatically optimized
to meet the current car speed by GPS.
"OFF", "ON"
[Space Enhancer]
■
Select the feeling of sound space
enhancement.
"OFF"/"Small"/"Medium"/"Large".
This setting is not available for the Radio
source.
■ [Supreme]
Turn ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-
frequency range that is cut off when
encoding.
■
[Realizer]
Virtually make the sound more realistic using
the Digital Signal Processor (DSP) system.
Select the level from "OFF"/"1"/"2"/"3".
[Stage EQ]
■
You can adjust the height of speakers
virtually to suit your listening position.
"OFF"/"Low"/"Middle"/"High".
[Parametric EQ]
■
When set to "ON", you can use the parametric
equalizer. For details, see Parametric
Equalizer (P.82).
Controlling Audio
81
English