Kenwood DNR1008RVS Instruction Manual page 69

[Device List]
■
Select the connected device to be used.
(P.53)
[Device Name]
■
If you select [ON] for [Bluetooth], you can
change the Bluetooth device name.
See Change the device name for bluetooth
(P.70).
[PIN Code]
■
If you select [ON] for [Bluetooth], you can
change the PIN code.
See Change the PIN Code (P.70).
[Device address]
■
Display the Bluetooth device address.
[TEL SETUP]
■
You can make various settings for the Hands-
Free function.
See Hands-Free Setup (P.61).
[Wi-Fi SETUP]
■
You can change the device name for Wireless
Mirroring and display the device address,
password. See Change the device name for
Wireless Mirroring (P.70).
[Android Auto Auto Launch]
■
Select whether to display the Android Auto
screen automatically. Default is "ON".
[Guidance/Voice Recognition Volume]
■
Adjust the volume of the guidance and voice
recognition in Apple CarPlay/Android Auto
mode. Default is "19".
[Incoming Call Volume (Ring)]
■
Adjust the ring tone volume in Apple
CarPlay/Android Auto mode. Default is "15".
[In Call Volume (Talking)]
■
Adjust the dial tone volume and the volume
during a call in Apple CarPlay/Android Auto
mode. Default is "15".
[Speech Quality Adjust]
■
Adjust the speech quality.
[Microphone Level] : Adjust the level of
microphone gain. Default is "0".
[Echo Cancel Level] : Adjust the level of
echo cancellation. Default is "0".
[Noise Reduction Level] : Reduce the noise
generated in the surrounding environment
without changing the microphone volume.
Use this function when the voice of caller is
not clear. Default is "0".
[iPod Bluetooth Connection]
■
See Select the method of making
connections for outputting sound from
the iPod source (P.33).
[AV-IN Interface]
■
Set up the input device of the AV-IN terminal.
[AV-IN] (Default): Select when AV device is
connected. Use as a AV-IN source.
[Rear Camera with MIC]: Select when an
AV-IN Audio input is connected to the Rear
View Camera Input (Audio). See Connecting
the camera (P.101)
Use AV-IN Audio as the microphone for the
Rear View Camera.
• Cannot be selected when using the AV-IN
source. Switch the source selection.
■ [AV-OUT]
You can select an AV source to be output
from the AV OUTPUT port.
OFF, iPod, USB, SD, AV-IN, or NAV
• You cannot select AV-IN if the Video input
terminal is used for camera.
• You cannot select iPod if it is connected via
Bluetooth or Apple CarPlay is connected.
• If you select iPod as the main source, you
cannot select USB or SD as the AV output
source.
• If you select USB as the main source, you
cannot select iPod or SD as the AV output
source.
• If you select SD as the main source, you
cannot select iPod or USB as the AV output
source.
• If you select HDMI as the main source, files
with sampling rates higher than 96 kHz in
USB or SD selected as the AV output source
are skipped.
• If you select Bluetooth audio, Radio,
Wireless Mirroring, Apple CarPlay or
Android Auto as the main source, you
cannot select USB, SD or iPod as the AV
output source.
• AV-IN can be selected if the [AV-IN
Interface] is set to [AV-IN].
[Reset Android Auto Wireless
■
Connection]
You can change the password for wireless
Android Auto.
The system of the unit is rebooted after
selecting [YES].
Setup
69
English