Special Setup; Display Setup - Kenwood DNX994S Instruction Manual

Setting Up

Special Setup

You can setup Special parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Special].
h Special screen appears.
h
4
Set each item as follows.
DEMO
■
Set the demonstration mode. Default is "ON".
Manual Power OFF
■
Assigns the function of the [HOME] button
when held.
AV OFF: Turns off the screen and audio.
Interrupts from incoming hands-free
calls, rear camera views and so on are
functional, though.
Complete OFF (Default): Switches off the
power. Interrupts are not functional.
SETUP Memory
■
Locks or unlocks the Audio SETUP Memory/
Recall/Clear.
Audio SETUP Memory
■
Memorizes the current audio setting.
• Fader/ Balance, Speaker / X'over, Equalizer
(User Preset, SW Level), Position/DTA,
Sound Effect (P.77)
Audio SETUP Recall
■
Recalls the memorized audio setting.
Audio SETUP Clear
■
Clears the AUDIO SETUP Memory and the
currently memorized audio setting.
Software Information
■
Check the software version of this unit.
(P.74)
Open Source Licenses
■
Displays the open source licenses.
Initialize
■
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
74
Ñ
Software Information
Check the software version of this unit.
1
Touch [Software Information] in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.

Display Setup

1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Display].
h Display screen appears. h
4
Set each item as follows.
Dimmer
■
Select dimmer mode.
OFF: The display and buttons do not dim.
ON: The display and buttons dim.
SYNC (Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
NAV-SYNC: Turns the dimmer function on or
off according to the Navigation Day/Night
display setting.