Kenwood DNR1008RVS Instruction Manual page 59

Ñ
Receive a call
1
Touch [ ] to answer a phone call or
] to reject an incoming call.
[
NOTE
• When shifting the gear to the reverse (R) position
and monitoring the picture from the rear view
camera, this screen does not appear even if a call
comes in.
• The portrait registered in the phonebook is
displayed while making/receiving calls and
during a call.
• If you edit the phonebook on the connected
device side after downloading the phonebook,
the portrait may not be displayed depending on
the edited content. It is recommended that you
download the phonebook whenever you edit it.
• The image quality of a displayed portrait may
depends on a connected device.
To end call
1
While talking, touch [
].
Ñ
Operations during a call
● Adjust the volume of your voice
1) Touch [Speech Quality].
2) Touch [T] or [U] for [Microphone Level].
● Adjust the receiver volume
Turn the volume knob clockwise to increase,
and counter-clockwise to decrease.
● Mute your voice
Touch [ ] to mute or not to mute your voice.
● Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
● Switching between speaking voice
output destinations
Touching [
]/[
speaking voice output destinations between
the smartphone/cell-phone and the speaker.
Bluetooth Control
] each time switches
English
59