Menu Access - Honeywell Galaxy 2 Series User Manual

Menu Access

To access the other functions of the system, users can enter the menu mode by typing their
PIN code and pressing the ent button. This will display the first menu item after showing
system status for five seconds.
Users can then navigate around the menu using the scroll keys, ent key and esc key, or they
can jump to any specific menu item directly by typing the number of the item. An overview of
all the accessible functions is shown below. Not all users will be able to access all of the
functions. This will depend on their 'user type' that is set up in menu 42.
10 = Setting
11 = Omit Zones 21 = Zone Status
12 = Timed Set
13 = Part Set
14 = Night Set
15 = Chime
The function of each menu item is described in the following pages.
10 = Setting 10 = Setting 10 = Setting
10 = Setting 10 = Setting
[ent] to Select [ent] to Select [ent] to Select
[ent] to Select [ent] to Select
20 = Display
22 = View Log
23 = System Version
24 = Print
Table 1. Menu Access
30 = Test 40 = Modify
31 = Walk Test 41 = Time/Date
32 = Output Test 42 = Users
44 = Mobile Nos
47 = Remote Access
48 = Level 3 Access
9